Home / Tipping / Box tipper ZC

Box tipper ZC

This box tipper is designed to tip filled boxes of cabbage onto a transport conveyor. It is usually installed in front of a cabbage processing line.

This box tipper is designed for cabbage. The box tipper is used to tip boxes. After the box is placed, the box tilts to the upper position. While the box is going up, the box is emptying onto a transport conveyor. A sensor will be installed to detect and control the produce output. This sensor sends a signal to start or stop the rotation of the box. The box tipper is available in mild painted and stainless steel.

A sensor will be installed to detect and control the produce output. This sensor sends a signal to start or stop the rotation of the box

This box tipper is designed to minimize the drop height of the product. This is done by rotating the box to angle of 140° on a transport conveyor, which will gently feed the next position.

On demand, the box tipper can be provided with safety fences, sirens & warning lights to enhance safety.

On demand, the machine can be controlled remotely using a wireless remote control.

Characteristics

  • We have one model available for 1600 mm wide boxes
  • Especially designed for cabbage to minimize the drop height
  • A heavy-duty cylinder is used so that it can handle heavy load requirements
  • Durable and robust construction to handle heavy loads & forklift impacts
  • Tipping rotation to 140° ensures complete discharge of produce
  • The maximum weight of the box is 2500 kg
  • On demand, a subframe can be made to overcome a height difference
  • On demand, a wireless remote control can be provided
  • On demand, safety fences, a siren & warning lights can be provided to enhance safety

Specifications

ZC 160
Rotation angle (max) in deg 140
Width of the box (min-max) in cm 100-160
Height of the box in cm 125
Depth of the box (min-max) in cm 80-120
Weight of the box (max) in kg 2500

OptionsItems marked with * are optional

  • Material and treatment (frame)
Painted mild steel
Frame and plating is made from painted mild steel. The bearings and drive/idle rollers are from mild steel
Galvanized steel
Frame is made from galvanized steel. The bearings and drive/idle rollers are from mild steel. The plating is from stainless steel
  • Electrical control
Stand-alone
Motors, necessary sensors and control panel. The length of the cable is 5, 10, 15 or 20 meter
  • Material and treatment (electrical panel)
Painted mild steel
The electrical panel is made from painted mild steel
Stainless steel
The electrical panel is made from stainless steel
  • Remote control
Wireless
A wireless remote control is included. The machine can be controlled from a distance
Pulling cord
A pulling cord, to control the machine, can be mounted on the ceiling (no installation included)
  • Machine guarding system*
Safety
Machine guarding system to protect people, equipment and operations. Area protection by fencing in combination with light curtain. Protects people from entering hazardous areas

Make an inquiry

    Allround Vegetable Processing value your connection. Rest assured, we respect your privacy and will use this information responsibly. We look forward to providing you with exceptional vegetable processing solutions for all your vegetable processing needs.

    Make an inquiry

      Allround Vegetable Processing value your connection. Rest assured, we respect your privacy and will use this information responsibly. We look forward to providing you with exceptional vegetable processing solutions for all your vegetable processing needs.